The use of optical fiber welding machine and maintenance

in the residual energy in the battery should be run out before charging, suggest using welding machine to provide discharge function; If the battery for a long time not to use, battery should be charged, and the charge and discharge completely once a month. In the field construction, attention should be paid to do the clean work. Ensure that fiber fixture, mirrors, and the cleanness of V groove, if there are any dirt or foreign body, clean cotton available anhydrous alcohol. Get into the habit of conveniently close wind cover, avoid dust and fiber debris fell into the machine. General optical fiber welding machine offer automatic start function, namely close wind machine automatically started after welding, suggest to turn off this function.



way for electric welding machines, generally there are three, alternating current (ac), the built-in battery and dc power supply. When using a small generator for power equipment, should be equipped with a regulated power supply, in order to avoid impact damage to the equipment of the ignition coil current. Welding machine equipped with a built-in battery if improper use will reduce battery capacity, residual battery before charging the battery should be in the light, suggest using welding machine to provide discharge function; If the battery for a long time not to use, battery should be charged, and the charge and discharge completely once a month.

fiber fine closely cutter is an important part of the welding machine, cutting quality of the optical fiber is an important guarantee of weld. In use to maintain optical fiber pressure feet, V groove and the cutter blade clean. Found that cutting quality decreased obviously, the rotating cutting blade to the next blade, blade used after a circle and shall promptly replace the blade. Welding machine offers a variety of welding mode of corresponding to different optical fiber, should correspond to optical fiber types to choose the appropriate welding mode, non-professional workers do not modify the model of the parameters, so as not to affect the welding quality. When optical fiber welding machine malfunction, with welding machine self-checking function can eliminate part of the problem or find the cause of the problem, such as the problem is still not solved, should contact suppliers in a timely manner, please teardown. Suggest a yearly comprehensive maintenance of welding machine, to the state of the device, mechanical transmission, electrodes, batteries, the cutting knife and so on various parts to do a comprehensive testing and maintenance.