The TJ-03 joining software provide a temporary fiber splice for fiber and cable connections to test tools corresponding to OTDRs. To begin fusing your fibers collectively, you must take away or strip the protective polymer coating across the optical fiber.

Record your existing settings to be able to return to them if essential. Be Gentle - Prior to fusion splicing, fiber coatings have to be stripped away. To scale back the chance of damaging the fiber when stripping, strip off coatings in a collection of quick segments. This will cut back the drive required to take away these coatings.

It should have a sturdy case with anti-shock features similar to foam inserts. Many fusion splicers embrace handy constructed-in ovens that allow you to shortly apply heat-shrink splice sleeves to your accomplished splices. Some models feature a twin-tube heat oven that speeds the shrinking course of. If the method of elimination doesn’t determine your downside, you'll be able to then attempt adjusting settings in your fusion splicer.

However, you don’t essentially have to purchase a brand new fusion splicer just to use SOC’s. Many splicer producers provide removable splice holders that enable SOC’s for use with a few of their earlier fashions. There are many variables that must be taken into account if you end up splicing different types of fiber. So while it's difficult to get all the way down to specifics hopefully this guide ought to give you a good idea of the method as an entire and get you began.

Just keep in mind to take your time while splicing in order guarantee a great clear splice, it will save time in the long run. With the coating stripped from the fibers it is now time to simply clip away any excess, uncovered Kevlar along with your Kevlar cutter. Once accomplished slide considered one of yourSplice Sleeves onto certainly one of your fiber, you may not be able to do this after you have spliced the 2 fibers together so it is best to do it now.

From now on it is attainable to work with the optical fiber cable having no concern it could break up by the purpose of fusion. Fusion splicing is usually used for repairing a damaged fiber link, and it's considered the most effective technique for connecting 250-micron outside plant fiber to 900-micron inside plant fiber on the building entrance. Fusion splicing can be used for creating fiber links inside the data center or in the LAN. Fusion splicing at the building entrance or at fiber panels can be achieved utilizing splice-on pigtails or splice-on connectors.