The Bluetooth® function, along with simplified mechanical operation, increases general productivity and reliability. The fiber clamp opens beyond ninety levels and readies the blade for cleaving in the identical movement. This permits simple viewing of the distance scale used to gauge cleave length.

SKL-6C High Precision Cleaver is installed with 3 in 1 holder which is relevant to 250μm fiber cable&900μm fiber cable, flat cable, and fiber jumper cable. With the perform of a utomatic knife again slide, just must put the duvet back and fiber push to complete all chopping work. Fiber cleaver X-50B is a very high precision fiber cleaver with steady efficiency, which is an effective tool for your fiber optical tasks. The FIBER-CLK-QS is a excessive precision and environment friendly fiber optic cleaver.

Designed for cleaving purposes, similar to fusion splicing, mechanical spicing, and fast assembly, the fiber cleaver can be utilized with 900µm, 2mm, and drop cables. The CT50 fiber cleaver features automated blade rotation, unprecedented sturdiness, and simplistic upkeep unseen with any other cleaver. Paired with a Bluetooth enabled Fujikura splicer, cleaver blade positions may be automatically advanced when wanted based on cleave count or cleave high quality.

If automated rotation is not desired, the blade position could be superior at the contact of a button, no instruments required. The easy to learn blade place indicator clearly displays the chosen position.

The slicing size is eight to 20mm and the typical angle is usually 0.5 levels. The cleaver blade can function 1,000 cuts on each of the sixteen positions at three different height changes allowing for a total of forty eight,000 cuts per a cleaver blade. Based on the well-known AutoCleaver™ platform, it is a fully automated optical fiber cleaver for production and laboratory settings with a cycle time of less than 15 seconds.

The FS-C98 high precision fiber cleaver from Precision Rated Optics is a single step cleaver for cleaving optical fibers. It is a small and light-weight cleaving answer measuring at approximately 3 inches deep by 3 3/four inches wide by 2 half of inches tall and just below 10 ounces. The cleaver’s fiber holder is designed to accommodate 250um to 900um fibers.

Domestic Sumitomo FC-6S high precision optical fiber cutter is suitable for precision chopping tools of single core fiber, the chopping knife is suitable for 250 m coated optical fiber . SKL-6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.which adopts South Korean technology and is suitable for chilly joint and scorching melt. It is a multi-objective optical fiber cutter, the product makes use of the 16 chopping factors and has a longer service life .