From the weld failure summary, a small suggestion for welding construction personnel!

From the weld failure summary, a small suggestion for welding construction personnel! Please note: put the V groove of the fiber, must, must, be sure to keep it clean. Dirty, use a toothpick ( Bamboo toothpicks, with blades must peel special tips, then gently scrape V groove, must be clean, do not get directly with the blade, damaged the V groove machine must be back for maintenance) Pressure the pressure Angle of the fiber, also want to use alcohol cotton, wipe clean. Otherwise directly affected, the welding speed of the machine. Wear and tear. And welding quality. When using optical fiber welding machine after a period of time, environmental change particularly big, such as altitude, temperature, humidity, wind, the size of the discharge correction must do it, the machine will automatically correcting current ( Since the size of the current directly determine the height of the temperature, so the temperature of the different environmental needs is not the same) Or special after violent shocks. Must do self-checking system parameters, and discharge correction! Because the machine in order to protect, parameters, he will automatically lock in some of the parameters. To do this is to make the machine calibration parameters. Be sure to remember. Must form the good habit of maintenance machine!