Welding machine automatic shutdown is the cause?

with the gradually popularization of the welding machine in our life and production, or more, will still have some problems in the use, so is likely to lead to the loss, so welding machine automatic shutdown is the cause? The following and qin day communication technology to understand together.
1, optical fiber welding machine differential signal
a lot of old optical fiber welding machine under the condition of the signal is poor, can appear the situation of the automatic shutdown, but this kind of optical fiber welding machine of the modern people is seldom used.
welding machine automatic shutdown is the cause?
2, as long as the button will appear after shutdown boot
the cause of this phenomenon is that the optical fiber welding machine internal hardware have loose phenomenon, through to the hardware to find you can find the problem. In addition to these, the cause of the organs of welding machine is very much, now common are:
welding machine automatic shutdown is the cause?
(1) the emergence of the law to turn it off.
(2) button to turn it off.
3. Telephone is power off.
4. After the boot is set to turn it off.
5. Let go is to turn it off.
6 cover is turned off.
7 launch to turn it off.
end lights turned off.
appeared above this kind of situation, don't try so hard, to accurately find the reason of shutdown, to check the battery contact plate, welding machines and see circuit welding parts of the welding conditions, and then see if optical fiber welding machine software problems.