Optical fiber cutting knife,

fiber cutting knife is used for cutting hair thin fiber, fiber cut out with hundreds of times a magnifying glass you can see it is flat, cut and flat after two optical fibers can be discharge and docking. Currently used materials for quartz optical fiber, optical fiber cutting knife so that the cutting material is required: adapt to optical fiber: single core and multicore quartz bare fiber to adapt to the optical fiber cladding diameter: 100 - 150 um with strip fiber pliers to remove the surface coating, reserve, about 30 - 40 mm, encase with dip alcohol cotton wool fiber, optical fiber clean again. In a load of fibre channel, for cutting the fiber. Note that after cutting the fiber end face have to be very careful, don't touch anything, otherwise, the influence of cutting effect. If there is a cut fiber, can raise the cutting point. If there is a cut of the face is not smooth, can change a knife. Optical fiber cutting knife a blade has 12/16 of the surface, each side has three height ( The three points) More than 1200 times, the average point can be used. In order to ensure the best effect of the section, optical fiber cutting blade to use after a period of time or replace the cutting edge position, would you please clean blade in ultrasonic cleaning machine, to ensure the cleanliness of the blade surface and the cutting section mirror effect. Guangzhou bo optical communication technology co. , LTD. Production of optical fiber cutting knife has a very high cost performance, technical level has reached domestic leading level, can completely replace similar imported products. Can be applied to the ancient river, FURUKAWA） , cane warehouse ( FUJIKURA) , sumitomo ( SUMITOMO） Domestic and foreign brands such as optical fiber welding machine.