Do You Know The Steps Of Fiber Optic Cutting?

The preparation of the instruments：

16S fiber fusing machine, fiber line, scissors, fiber cleaver, stripping pliers, fiber box, alcohol, cotton paper

Three steps to prepare optical fiber before fiber fusion:

1. Reroming the coating

Peel off the sheath at least to leave a 50mm coating (loose and tight). Remove the coating layer with stripping pliers, the length is 30~40mm.

2. Clean the fiber with an alcohol-dipped cotton paper.

3. Fiber cleaver

cutting fiber with high precision fiber cleaver and strictly control the length of cutting fiber

Note：

Ensure that bare optical fibers and their sections are not stained.

- avoid placing optical fibers on dirty surfaces

- check whether the v-shaped groove and pressure hammer are clean. If not, it must be cleaned with cotton swabs dipped in alcohol